>>>>> "Bill" == Bill W2BLC <
[hidden email]> writes:
Bill> I just noticed that when the Manual NTCH is engaged and the frequency
Bill> of the notch is set using VFO B - the main VFO is locked. You cannot
Bill> change frequency with VFO A, however the frequency can be controlled
Bill> via HRD. This lock can be toggled off by pressing the A/B button.
VFO A knob is disabled while you're in notch configuration mode, if you
press NTCH again you'll still have the notch at the desired offset
and you can move VFO A again. I see that pressing any other key also
exits from config mode (as it should be), so this is probably what
you're seeing.
Bill> Is this a feature? Anomaly? Or, just one of those odd little things
Bill> that can happen when something is designed to be foolproof - and
Bill> underestimating the ingenuity a complete fool.
I wouldn't see the need to lock computer control of VFO A while setting
notch.
Pf
--
Pierfrancesco Caci, ik5pvx
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
