Many thanks to Mike, N5WNG, and Jeff, W7BRS, for comments.
I'm measuring the output power on an external power meter and the
internal power meter is pretty well spot on. I have a KAT3 and I've been
doing the ATU TUNE (10W) before I key at 50W or whatever.
I noticed that the PA TEMP was set quite high (27 deg C) so I turned it
down to 22.
I've just upgraded the firmware to 2.63 and it hasn't solved the problem!
73
Bob MM0RKT
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
