> The transmit light goes on but no power out and failure to
> connect.
Are you seeing four bars of ALC? It sounds like you do not
have the audio levels set correctly.
Use DATA A, set MENU:MIC+LIN = OFF and MENU:MIC SEL=LINE IN.
Set your software TX level at about 80%, set the Windows Volume
Mixer for your sound card output "Speaker (USB Audio CODEC)" at
80%, adjust the K3/K3S Mic Gain for four bars of ALC and set the
output power level using the PWR control.
73,
... Joe, W4TV
On 1/25/2016 9:58 PM, Reed Bumgarner wrote:
> I'm having trouble getting RMS Express to transmit. I've tried various
> combinations of RTS PTT settings and am using the digital setting in the
> RMS software. The transmit light goes on but no power out and failure to
> connect.
> Do I need to use port share software with the KIO3B? Is there another
> setting I'm overlooking?
> Thanks for any insights.
> Reed AA1RB
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
