K3 with KIO3B and RMS Express

[jreedbum]

I tried to implement Joe's suggestion on settings, but with data mode set
to Data A the MIC+LIN menu just says "not APPL" and that's all. I am using
the USB connection between the KIO3B and the computer.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

On 1/29/2016 1:21 PM, Reed Bumgarner wrote:
> I tried to implement Joe's suggestion on settings, but with data mode
> set to Data A the MIC+LIN menu just says "not APPL" and that's all.

In which case you probably already have MIC SEL set to LIN IN.

Do you have anything connected to the Line In jack on the back of the
K3?  Connecting anything there will disconnect the USB CODEC.

73,

   ... Joe, W4TV


On 1/29/2016 1:21 PM, Reed Bumgarner wrote:

> I tried to implement Joe's suggestion on settings, but with data mode set
> to Data A the MIC+LIN menu just says "not APPL" and that's all. I am using
> the USB connection between the KIO3B and the computer.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]