> Kenwoods and Elecraft need to have a Radio Control program
> running to interface the hookup. Simon has provided that
> service with K3 support on Ham Radio Deluxe.
If your logging or other rig control program will enable the
Kenwood or Elecraft "auto information" mode when it exits
(AI1;) the transceiver will send a IF data packet whenever
the transceiver frequency changes. This is all the SteppIR
controller needs to follow the radio without the logging or
control program.
You can probably use a terminal program to enable AI if necessary.
73,
... Joe, W4TV
> -----Original Message-----
> From:
[hidden email]
> [mailto:
[hidden email]] On Behalf Of Mike Penkas
> Sent: Thursday, December 13, 2007 8:57 AM
> To:
[hidden email]
> Subject: [Elecraft] K3 with SteppIR antenna
>
>
> Finally got around to slaving my SteppIR control box to the
> K3 for automatic frequency change. No problem at all. I
> simply used the "Y" cable from SteppIR, of which there is a
> diagram in the files section of the SteppIR Yahoo Group.
> Kenwoods and Elecraft need to have a Radio Control program
> running to interface the hookup. Simon has provided that
> service with K3 support on Ham Radio Deluxe.
> Mike WA8EBM
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
