Elecraft

K3 won't transmit split (SSB) if monitoring sub

Classic

List

Threaded

4 messages Options

Ron Spencer

K3 won't transmit split (SSB) if monitoring sub

Set split on K3. Monitor sub and no rf out. Stop monitoring sub (still
split) and fine output. Same result on cw. And yes, I've hit a to B
twice so ALL shows. Thought I'd post here first for ideas.

Thanks
Ron
N4XD
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Nr4c

Re: K3 won't transmit split (SSB) if monitoring sub

What is VFO B mode set to.

Sent from my iPad
...bc nr4c

> On Jan 19, 2016, at 3:24 PM, Ron Spencer <[hidden email]> wrote:
>
> Set split on K3. Monitor sub and no rf out. Stop monitoring sub (still
> split) and fine output. Same result on cw. And yes, I've hit a to B
> twice so ALL shows. Thought I'd post here first for ideas.
>
> Thanks
> Ron
> N4XD
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Mike VE3YF

Re: K3 won't transmit split (SSB) if monitoring sub

In reply to this post by Ron Spencer

Ron:

You will probably find that VFO B is not on the same mode. I have just gone thru that with one of my K3's in that VFO B was set to LSB. I have no idea how it happened, but it did it for every band. I must have done a global setting somehow to mess it up. I had to go into every band and every memory register and manually set it to the correct mode.

A>B works as a temp fix, but unfortunately it doesn't effect the band stack registers and you will still have to do a manual change.

73 De Mike
VE3YF

http://www.ve3yf.com
[http://www.ve3yf.com/]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Mike VE3YF

Re: K3 won't transmit split (SSB) if monitoring sub

In reply to this post by Ron Spencer

Ron:

One other thing to check, what is your KRX3 menu setting at. I think it should be ANT=ATU, I can't remember there might be one other setting, it has to do with the output of the sub receiver ie Ant 1, Ant 2 or BNC. Hope that also helps, I just don't have the manual handy at the moment.

73 De Mike
VE3YF

http://www.ve3yf.com
[http://www.ve3yf.com/]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]