K30-Mini link stoped working.

[Brian D. Comer]

I am in the process of setting up a remote station. I have the K30-mini and
the two RRC1258 units with a K3S as the remote.

 

Currently I am on using my LAN, which worked fine on initial setup. In
trying to set up the remote using HRD and the control RRC, I have broken the
system. In returning the settings  to use K30 control the only thing I see
wrong is that the remote RRC settings indicate the K3S is off. I had not
taken a note of this setting when the  system was working but the K3S is on
and I cannot see why the RRC indicating it is off. I have checked all cables
on the K3S and remote RRC. Should the remote RRC1258 be reporting radio ON?

 

73 Brian KF6C.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Brian D. Comer]

I had not changed the IP addresses, or the Sip Contact, I was able to
communicate with the RRCs on their correct address. However I just reset the
IP in the Sip Contact and it is now working. I am a little curious as the
status of the remote indicates the radio is off but its connections is oK.

Thanks

Brian KF6C

-----Original Message-----
From: Nr4c [mailto:[hidden email]]
Sent: Saturday, December 12, 2015 5:50 PM
To: Brian D. Comer
Subject: Re: [Elecraft] K30-Mini link stoped working.

IP addresses?

Sent from my iPhone
...nr4c. bill

> On Dec 12, 2015, at 8:26 PM, Brian D. Comer <[hidden email]> wrote:
>
> I am in the process of setting up a remote station. I have the
> K30-mini and the two RRC1258 units with a K3S as the remote.
>
>
>
> Currently I am on using my LAN, which worked fine on initial setup. In
> trying to set up the remote using HRD and the control RRC, I have
> broken the system. In returning the settings  to use K30 control the
> only thing I see wrong is that the remote RRC settings indicate the
> K3S is off. I had not taken a note of this setting when the  system
> was working but the K3S is on and I cannot see why the RRC indicating
> it is off. I have checked all cables on the K3S and remote RRC. Should the

remote RRC1258 be reporting radio ON?

>
>
>
> 73 Brian KF6C.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]