Sometime ago I installed the K3EXREF which I feed from an external 10MHz double oven Xtal oscillator. I am confident the K3EXREF is installed and configured correctly as when in use and the external oscillator is connected the front panel says REF*CAL with the * blinking. Attempting to change the local oscillator frequency gives the message "Locked" just as the manual says.
However, I am puzzled as the local oscillator frequency display slowly drifts down from 49.379.675Hz to 49.379.622Hz over a period of at least an hour from K3 switch on. I leave the external oscillator on permanently. I was expecting the local oscillator to rapidly get to its final frequency. Can someone explain whats happening as I am puzzled??
My firmware is the latest version.
Andy G4HUE
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
