K3S 10684 DISPLAY BLANK

[Ron Durie]

After talking with Elecraft technical support, I learned that common causes
for this problem are poor solder connections on the LCD Driver IC or the LCD
itself.
Elecraft is sending me a new Display board under Warranty Exchange.  
At times like these it is reassuring to have such good technical support
from Elecraft.
One reason I continue to choose products from Elecraft.  

Ron Durie
WB4OOA
Elecraft K3s-Line
[phone]





______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

I have owned Elecraft transceivers for less than a year. I had a couple of
issues with one K3S and some issues that were just operator related.  In
all cases Elecraft very responsive, helpful and resolved the problem.
Kudos to Elecraft's customer service department!

John KK9A


Ron Durie wb4ooa at gmail.com
Wed May 4 13:02:56 EDT 2016


After talking with Elecraft technical support, I learned that common causes
for this problem are poor solder connections on the LCD Driver IC or the LCD
itself.
Elecraft is sending me a new Display board under Warranty Exchange.
At times like these it is reassuring to have such good technical support
from Elecraft.
One reason I continue to choose products from Elecraft.

Ron Durie
WB4OOA

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]