K3S AGC macro question

[ae4pb]

Hi, I'm learning macros and using the K3 test utility to learn.

Tech MD is turned on.

 

When trying to set AGC SLP=000 and AGC THR=8 using the below commands the
AGC SLP setting refuses to change.

MN074;MP008;MN017;MP000;SWT14;

 

Troubleshooting:

Entering the following commands responds with ?:  but I see the correct
attribute displayed.

MN017;

MP;

 

Variations I've tried for the data command:

MN074;MP008;MN017;MP000;SWT14;

MN074;MP008; SWT14;MN017;MP000;SWT14;

MN017;MP000;SWT14;

MN017;MP00;SWT14;

MN017;MP0;SWT14;

 

I'm not sure what I'm doing wrong..

Firmware version MCU 05.35

 

Tnx.

 

 

 

 

Jerry Moore

CDXA, INDEXA, SKCC, Fists

AE4PB, K3S - S.N. 010324

http://www.qrz.com/db/AE4PB

An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]