K3S - DATA A vs AFSK A
Locked
 
|
K3S using internal USB codec and W7 .
I have an issue I dont understand --- N1MM /MMTTY -- RTTY --- using VOX for PTT. If I leave LIN OUT levels (about 35) and Windows levels (49 percent) then WSJT -sets up with 4 bars ALC 5th flickering - makes no difference if I run WSJT alone or run it thru N1MM running WSJT no change in settings . Then try to use AFSK A for RTTY I get no ALC bars at all - I see the RTTY diddles on the MMTTY screen - nothing I do will get any bars if I do nothng but switch to DATA A change nothing else - I get solid 7 bars and have to reduce MIC gain (LIN) to 10-11 from 35-37 to get 4 bars 5th flashing . I have the RTTY freq set 915-170 -MMTTY decodes fine in RX. What am I missing ?? Hank K7HP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
When I run MMVari after running WSJT-X, I sometimes have the similar experience. So, I have to re-tune the audio property for MMVari. It seems WSJT-X sets Windows audio property to its favorite setting and never set it back to the original setting on its termination.
73 de JH3SIF, Keith > 2019/12/21 17:37、HP <[hidden email]>のメール: > > K3S using internal USB codec and W7 . > > I have an issue I dont understand --- N1MM /MMTTY -- RTTY --- using VOX for PTT. > > If I leave LIN OUT levels (about 35) and Windows levels (49 percent) then WSJT -sets up with 4 bars ALC 5th flickering - > makes no difference if I run WSJT alone or run it thru N1MM running WSJT no change in settings . > > Then try to use AFSK A for RTTY I get no ALC bars at all - I see the RTTY diddles on the MMTTY screen - nothing I do will get any bars > if I do nothng but switch to DATA A change nothing else - I get solid 7 bars and have to reduce MIC gain (LIN) to 10-11 from 35-37 to get 4 bars 5th flashing . > > > > I have the RTTY freq set 915-170 -MMTTY decodes fine in RX. > > What am I missing ?? > > > Hank K7HP > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
DATA A is USB data mode. AFSK A is Audio FSK and is used for RTTY which is a LSB data mode.
Sent from my iPhone ...nr4c. bill > On Dec 21, 2019, at 3:58 AM, Keith Onishi <[hidden email]> wrote: > > When I run MMVari after running WSJT-X, I sometimes have the similar experience. So, I have to re-tune the audio property for MMVari. It seems WSJT-X sets Windows audio property to its favorite setting and never set it back to the original setting on its termination. > > 73 de JH3SIF, Keith > >> 2019/12/21 17:37、HP <[hidden email]>のメール: >> >> K3S using internal USB codec and W7 . >> >> I have an issue I dont understand --- N1MM /MMTTY -- RTTY --- using VOX for PTT. >> >> If I leave LIN OUT levels (about 35) and Windows levels (49 percent) then WSJT -sets up with 4 bars ALC 5th flickering - >> makes no difference if I run WSJT alone or run it thru N1MM running WSJT no change in settings . >> >> Then try to use AFSK A for RTTY I get no ALC bars at all - I see the RTTY diddles on the MMTTY screen - nothing I do will get any bars >> if I do nothng but switch to DATA A change nothing else - I get solid 7 bars and have to reduce MIC gain (LIN) to 10-11 from 35-37 to get 4 bars 5th flashing . >> >> >> >> I have the RTTY freq set 915-170 -MMTTY decodes fine in RX. >> >> What am I missing ?? >> >> >> Hank K7HP >> >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |