If you like the sound of the Polk Audio speakers, then I suggest a
couple of resistors in series with the headphones to reduce the
headphone level.
I'm using a pair of speakers from Radio Shack. Catalog number 40-1313.
These can be used powered with internal or external power or passive.
They are basically 2" x 4" oval speakers in a nice enclosure. I found
two pair, new in the box, on the auction site for under $40 / pr.
73
Bob, K4TAX
On 10/14/2015 4:17 PM, Irwin Darack wrote:
> A speaker volume question.
>
> My set up: I have a pair of Polk miniature (non powered) stereo speakers
> plugged into my K3S. I plug my headphones into the front connector and
> have the Config menu set up so that if the headphones are plugged in, no
> sound comes from the stereo speakers.
>
> I find that the volume in the headphones is much higher than the stereo
> speakers when the AF audio is the same. I am wondering if there is a
> setting in either the Menu or Config settings to equalize this or adjust
> for the difference without having to constantly adjust the AF setting?
>
> Finally, it could just be that I need to find a better set of stereo
> speakers? any recommendations?
>
> Thanks,
>
> Irwin KD3TB
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
