I haven't specifically used the KXPA100 with K3/K3S, but I've use it with a K2, and it works FB. It should work equally well with a K3/K3S.
One issue is that when you change bands, you need to give the KXPA100 a squirt of RF so it can switch in the appropriate BPF (and recall the appropriate tuning solution if fitted with KXAT100 ATU). You just need to tap the paddle/key. If you tend to use one of those things with a curly cord rather than paddle/key, it may be less convenient.
This is not needed when changing bands on KX3 with KXPA100, or on a K3/K3S with KPA3, because in those cases the amp learns about the band change straight away via the CAT port/auxiliary bus.
73, Matt VK2RQ
On Tue, Aug 25, 2015 at 6:30 AM -0700, "bobk8rl--- via Elecraft" <
[hidden email]> wrote:
Am interested if anyone has used a KXPA100 with a K3/10 or K3S/10.
For those who own a KX3/KXPA100 combination, one home station option (final or upgrade step) would appear to be to buy a 10 Watt K3S and use their KXPA100.
Thoughts?
Robert E. Lee (Bob)
K8RL
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
