Does the current K3 firmware support the KXV3B in the K3?
73, Ross N4RP
On 5/14/2015 1:47 PM, Lyle Johnson wrote:
> The KXV3B, included as part of the basic K3S, has the functionality of
> the KXV3A plus the PR6-10. You do not need to order it separately.
>
> Unlike the PR6-10, the KXV3B does not tie up any of the accessory plug
> digital I/O lines to turn the preamp on and off.
>
> 73,
>
> Lyle KK7P
>
>> So if I understand this correctly there is no need to order a KXV3B
>> separately or a PR6 since both are now included standard in the K3S.
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
--
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
