K3S LP-Bridge Setup - How Does the K3S Know?

[Byron Peebles]

I do see how to SET the COM Ports in LP-Bridge, but I missed something
in how to tell what they should be on the K3S side.  I would think I
need CAT Control, Analog Audio (RTTY AFSK) and CW Keying.  What is the
means by which I determine the K3S side of things?

73, Byron

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Byron,

LP-bridge must connect to whichever real port is connected to the K3S.
Look in your computer's Device Manager (open Ports) to determine which
COM port was assigned to the K3S USB to serial adapter, then tell
LP-Bridge to connect to that port.

73,
Don W3FPR

On 10/17/2015 2:04 PM, Byron Peebles wrote:

> I do see how to SET the COM Ports in LP-Bridge, but I missed something
> in how to tell what they should be on the K3S side.  I would think I
> need CAT Control, Analog Audio (RTTY AFSK) and CW Keying.  What is the
> means by which I determine the K3S side of things?
>
> 73, Byron
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]