K3S Memories

[KQ5S-Tom]

I am trying to use the Frequency Memory Editor to store some frequencies in
memories 01-09.  I set memory 01 VFO A to 3700 and VFO B to 7100.  When I
click on the QSY button the radio set VFO A to 3700 but does not set VFO B
to 7100.  It sets both VFOs to 3700.

After sending the frequencies to the radio, when I use the M->V key and
rotate the dial to VFO 01 and hit M->V again I get the same results.

I also tried entering the frequencies in memory using the radio buttons and
get the same results.

Any ideas what I am doing wrong?

-----------------
73,
Tom - KQ5S
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[KQ5S-Tom]

Perhaps I should have mentioned I have Config: VFO IND set to yes and I
have the second receiver in the K3S.

-----------------
73,
Tom - KQ5S

On Sun, Feb 25, 2018 at 6:15 AM, Tom-KQ5S <[hidden email]> wrote:

> I am trying to use the Frequency Memory Editor to store some frequencies
> in memories 01-09.  I set memory 01 VFO A to 3700 and VFO B to 7100.  When
> I click on the QSY button the radio set VFO A to 3700 but does not set VFO
> B to 7100.  It sets both VFOs to 3700.
>
> After sending the frequencies to the radio, when I use the M->V key and
> rotate the dial to VFO 01 and hit M->V again I get the same results.
>
> I also tried entering the frequencies in memory using the radio buttons
> and get the same results.
>
> Any ideas what I am doing wrong?
>
> -----------------
> 73,
> Tom - KQ5S
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[KQ5S-Tom]

Thanks to Dan, N3ND, the answer was in the help files for the program.  I
actually looked at the help files but missed this.

*"T**he VFO B frequency must be on the same band as the VFO A frequency. If
you send a memory to a transceiver with different bands in the two VFOs,
the VFO B frequency will be replaced by the VFO A frequency."*


-----------------
73,
Tom - KQ5S

On Sun, Feb 25, 2018 at 8:03 AM, Tom-KQ5S <[hidden email]> wrote:

> Perhaps I should have mentioned I have Config: VFO IND set to yes and I
> have the second receiver in the K3S.
>
> -----------------
> 73,
> Tom - KQ5S
>
> On Sun, Feb 25, 2018 at 6:15 AM, Tom-KQ5S <[hidden email]> wrote:
>
>> I am trying to use the Frequency Memory Editor to store some frequencies
>> in memories 01-09.  I set memory 01 VFO A to 3700 and VFO B to 7100.  When
>> I click on the QSY button the radio set VFO A to 3700 but does not set VFO
>> B to 7100.  It sets both VFOs to 3700.
>>
>> After sending the frequencies to the radio, when I use the M->V key and
>> rotate the dial to VFO 01 and hit M->V again I get the same results.
>>
>> I also tried entering the frequencies in memory using the radio buttons
>> and get the same results.
>>
>> Any ideas what I am doing wrong?
>>
>> -----------------
>> 73,
>> Tom - KQ5S
>>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]