I have my K3S set up in N1MM+ as suggested on pages 187 & 188 of the Fred Cady manual (38400,N,8,1,CW,Always Off). The radio is set to RS232 = USB and PTT-KEY = OFF-dtr.
CW Transmit Message Decode Behavior: (.mf file)
When the function key (eg. f4) is set to '{MYCALL}', the radio transits as expected, but does NOT decode the CW mycall transmission.
When the function key is set to ‘{CATA1ASC KY *;}’, the radio transmits and DECODES the CW mycall transmission.
I get similar results for all of the function keys. Transmit decodes with CAT command, does not the standard command.
Any idea why the K3S decodes the CW message transmission using the CAT command, but not the MYCALL command? I have verified that the radio is transmitting in both cases. I have tried various decode threshold values as well.
Thanks.
73,
Marty - N1VH
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
