I have K3S #11832 factory assembled/tested.
Came home, worked well for several month plus and now this...
On start, I get error message PA1. When checking the <CONFIG: PA TEMP>
it indicates 57C upon a cold start. When trying to calibrate the PA
temp, the available adjustment range varies between 57C to 97C which
doesn't seem right by any understanding. The front panel temp is around
25C which I take to be correct. Also, I cannot get the cooling fans to
run with any setting of CONFIG switches or radio conditions. I've read
every manual that I have but cannot find anything that points me in the
right direction. Any and all suggestions much appreciated. Thanks.
...robert
--
Robert G Strickland, PhD ABPH - KE2WY
[hidden email]
Syracuse, New York, USA
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
