Elecraft

K3S Problem - Frequency Jump

Classic

List

Threaded

4 messages Options

stengrevics

K3S Problem - Frequency Jump

I have been using my K3S on WSJT-X without any problems. Today, the frequency appears to have shifted .7 KHz low. That is, if I were on 50.313 MHz FT8, I now have to tune to 50.3137 to decode signals.

I would appreciate any suggestions.

Thanks,

John
WA1EAZ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Nr4c

Re: K3S Problem - Frequency Jump

Check RIT/XIT.

Sent from my iPhone
...nr4c. bill

> On Mar 6, 2019, at 9:24 PM, John Stengrevics <[hidden email]> wrote:
>
> I have been using my K3S on WSJT-X without any problems. Today, the frequency appears to have shifted .7 KHz low. That is, if I were on 50.313 MHz FT8, I now have to tune to 50.3137 to decode signals.
>
> I would appreciate any suggestions.
>
> Thanks,
>
> John
> WA1EAZ
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

stengrevics

Re: K3S Problem - Frequency Jump

Thanks Bill. Yes, that seems to have been the problem.

73,

John
WA1EAZ

> On Mar 7, 2019, at 10:24 AM, Nr4c <[hidden email]> wrote:
>
> Check RIT/XIT.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On Mar 6, 2019, at 9:24 PM, John Stengrevics <[hidden email]> wrote:
>>
>> I have been using my K3S on WSJT-X without any problems. Today, the frequency appears to have shifted .7 KHz low. That is, if I were on 50.313 MHz FT8, I now have to tune to 50.3137 to decode signals.
>>
>> I would appreciate any suggestions.
>>
>> Thanks,
>>
>> John
>> WA1EAZ
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>

Nr4c

Re: K3S Problem - Frequency Jump

Don’t you hate it when the culprit is so simple?

Glad you found it.

Sent from my iPhone
...nr4c. bill

> On Mar 7, 2019, at 10:25 AM, John Stengrevics <[hidden email]> wrote:
>
> Thanks Bill. Yes, that seems to have been the problem.
>
> 73,
>
> John
> WA1EAZ
>
>> On Mar 7, 2019, at 10:24 AM, Nr4c <[hidden email]> wrote:
>>
>> Check RIT/XIT.
>>
>> Sent from my iPhone
>> ...nr4c. bill
>>
>>
>>> On Mar 6, 2019, at 9:24 PM, John Stengrevics <[hidden email]> wrote:
>>>
>>> I have been using my K3S on WSJT-X without any problems. Today, the frequency appears to have shifted .7 KHz low. That is, if I were on 50.313 MHz FT8, I now have to tune to 50.3137 to decode signals.
>>>
>>> I would appreciate any suggestions.
>>>
>>> Thanks,
>>>
>>> John
>>> WA1EAZ
>>>
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>
>