K3S RS232 "Y" Connector causing port conflict

[charles-2]

 

Hi Josh,

I'm not sure I understand your post.

Are you saying use a single line from the K3S RS232 port to the OM2500A
RS232 port labelled "TCVR", then a second line from the OM2500A RS232
port labelled "PC" back to the computer?

Thanks,

Charles K5UA

 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Josh Fiden]

Yes, exactly! OM2500A should echo data through its TCVR<>PC ports to
allow the computer to directly communicate with the K3.

73,
Josh W6XU

On 12/13/2015 1:46 PM, [hidden email] wrote:

>  
>
> Hi Josh,
>
> I'm not sure I understand your post.
>
> Are you saying use a single line from the K3S RS232 port to the OM2500A
> RS232 port labelled "TCVR", then a second line from the OM2500A RS232
> port labelled "PC" back to the computer?
>
> Thanks,
>
> Charles K5UA

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]