K3S RS232 "Y" Connector causing port conflict

[charles-2]

 

Hi Eric,

Sorry I'm late replying to your post.

If I read your post correctly, the K3S already has the ability to
communicate with the computer thru the USB port, AND echo the same data
through the RS232 port to the amplifier.

In fact, after digging through the CONFIG Menu I found that setting
AUTOINF to AUTO 1 will send band data on its RS232 port!!

That should solve my problem! Will try it.

Thanks for your post Eric.

Charles

 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Josh Fiden]

OM2500A must have frequency data, unless you are manually tuning it.

On 12/15/2015 3:45 PM, [hidden email] wrote:
> In fact, after digging through the CONFIG Menu I found that setting
> AUTOINF to AUTO 1 will send band data on its RS232 port!!

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]