Thanks to all who replied.
The method shown in the manual does work, as does the method John Simmons suggested.
The problem was that I was trying to set the com port below the radio com port on the N1MM configure screen, like I had to do on my old interface. Once I realized that the cw and ptt were controlled through the same port on the same line as the radio, all went well.
As usual, an “operator head space problem”
73 and have a Happy Thanksgiving.
Jim
W2SM
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
