K3S band Change with DX4WIN

[Bill Breeden]

Joe,

Good point.  I should have made some more tests before replying. After
another look, when I select a spot that requires a band change, my K3
stays in CW mode if the destination band was already in CW mode.

Thanks and 73,

Bill - NA5DX


[Elecraft] K3S band Change with DX4WIN

Joe Subich, W4TV lists at subich.com
Wed Aug 5 10:02:22 EDT 2015
Previous message: [Elecraft] K3S band Change with DX4WIN
Next message: [Elecraft] KAT500 tuner
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
 > When I click a spot, switch bands, even CW-to-CW, the K3S switches
 > first to the band, then SSB, and then CW.

Does the K3 actually switch to SSB or does it switch to the last used
mode on the "new" band before actually switching to the requested mode?

The K3/K3S stores mode by band and will recall the last used mode each
time you switch bands.

73,

     ... Joe, W4TV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Larry (K8UT)]

nVSP (non-Virtual Serial Port) is a serial port router that runs on
RaspberryPi and replaces Virtual Serial Port applications like LP-Bridge
that run on Windows. Aside from my desire to avoid running a VSP for my
LP-Pan/NaP3 panadapter, nVSP also translates the K3 CAT protocol to Icom
CI-V frequency data for my PW1 amplifier. Alpha tests at two hams' stations
using K3Ss, various logging programs, an LP-Pan/NaP3, and PW1s have been
successful and I am now looking for a broader audience to test the program.
The SteppIR controller interface has not been tested (don't have any SteppIR
gear, but it should work).

If you have been unwilling or unable to install a VSP on your computer this
free program may solve those problems.
Download the documentation and executable   nVSP.zip   here:
http://www.k8ut.com/tiki-list_file_gallery.php

True Cost Disclaimer: nVSP is free but the associated RPi, cabinet, and
multiple serial adapter cables will probably cost you between $125 and $175
dollars. Links to various suppliers are included in the manual.

-larry (K8UT)

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]