K3S connections for Winlink Express -

[Chris Kimball]

I'm running Winlink Express 1.5.37.0 with my K3S, using the same K3S USB
connector to computer cable that serves well for FLDigi.  

All is working well if the frequencies and bandwidths are set manually,
however, I'm not getting K3S frequency setting by Winlink Express when
channel setting on Winlink. All the work has been with ARDOP Winlink
sessions.

Do I need a cable from the RS 232 port to the computer USB port?

Do I need a K3S special setting?

Thanks,

Chris

NQ8Z



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Chris Kimball]

1. The single USB cable is all that's needed.

2. The USB setting was already set to RS232, all that's needed.

In using the Elecraft Utility to check the connection, the rate for the
connection was 38,400 b/s. I had entered only 9,600 b/s into Winlink
Express.

The Elecraft K3S operation manual explains how to check which port on the
computer that the K3S appears on. (Windows: Device manager/ Ports:
plug/unplug the device) The K3S was on COM4. (Although no other devices were
attached, COM3, was taken by something.  Beware.)

Actions: In Winlink Express / ARDOP Connection settings/ Radio: Set both
ports to COM4 and the rate to 38,400 b/s. Neat!

Chris

NQ8Z



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]