Alex,
no connections other than coax cable and a cable with cinch plugs both
ends are necessary.
Just set K3's power output to a level your Acom 1000 is satisfied with.
Make sure not to overdrive the Amp. Find the maximum drive level in the
manual of your Acom.
Your Amp will display an error message when drive level is set too high.
I use an Acom 1000 myself together with a K3. I never set the drive
level higher than the amp outputs about 100-200 Watts below maximum.
--
Ohne CW ist es nur CB..
73, Martin DM4iM
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
