[K3S] wsprlite-flexi patched into the K3S

[David Windisch]

CONTENTS DELETED

The author has deleted this message.

[Don Wilhelm]

Dave,

There is no input to the transmit amplification process in the K3S - you
would have to do a significant modification to accomplish that.

I am not certain why you think the signal filtering would be an
advantage.  The filtering in the K3/K3S is mostly in the receive path
(except for the TX EQ).  The device you mention is transmit only, and
you view the results of your transmitted signal on the internet.

OTOH, if you are refering to the K3S Low Pass Filters (the bare
wspr-lite has no low pass filters and they must be added externally),
then again, there is no externally accessible path to run wspr-lite
through those K3S filters without significant modification.

73,
Don W3FPR

On 11/20/2017 8:49 AM, David Windisch wrote:
> Hi, all concerned:
> Could this wsprlite-flexi device described here:
> https://www.sotabeams.co.uk/wsprlite-flexi
> be patched into the K3S to take advantage of its signal filtering and
> (ahem!) amplification capabilities?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]