Phil,
There are RS-232 "Y" adapters that will accomplish what you want.
Make certain the other devices will not attempt to transmit - their
drivers on the RS-232 lines must be disabled and present a high impedance.
73,
Don W3FPR
On 11/16/2016 8:53 PM, Phil Holliday wrote:
> Is there a schematic for this cable assembly? I am looking at the simplest way of connecting other RS-232 driven peripheral equipment which are just ‘listening’ devices, in my case my SteppIR SDA100 controller and SPE 1K-FA linear and minimizing cables now that I have a K3s & P3 connected by USB to my laptop with Logger32 and N1MM+ as my logging applications. My immediate thought is to tap into the CBLP3Y cable at the PC connection on the P3 and daisy chain the other devices. 73 Phil zl3pah
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
