K3s and Acom 2000a

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K3s and Acom 2000a

john@kk9a.com
Last year I used an Acom 2000A with my K3S and I only connected the relay
cable and coax to the amp. The amplifier sensed and adjusted itself so
quickly when transmitting that I question what benefit there is to using the
complicated Y cable/computer CAT hookup.

John KK9A
 

From: w0sz
Tue Aug 30 17:25:13 EDT 2016

I've read the archives and see Joe Subich's, W4TV, recommendations. Using
the E980297 cable from the K3s to the P3 and then a y cable from the P3 to
connect with computer and CAT control to the Acom 2000a RCU. Anyone else
have any experience doing it differently? 73

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3s and Acom 2000a

Kjeld Holm
Agree. I have done the same for some five years.
And even if you have the Acom antenna switch and selector you just send one
or two dits and you are on the air at the right antenna.
Vy 73 de OZ1CCM, Kjeld

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of
[hidden email]
Sent: 31. august 2016 03:04
To: [hidden email]
Subject: [Elecraft] K3s and Acom 2000a

Last year I used an Acom 2000A with my K3S and I only connected the relay
cable and coax to the amp. The amplifier sensed and adjusted itself so
quickly when transmitting that I question what benefit there is to using the
complicated Y cable/computer CAT hookup.

John KK9A
 
______________________________________________________________

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]