Problem solved, thanks for the advice. The jumper loop from the K3 to the
P3 had a bad connection to the upper PC connector, therefore the outside
world could not see my K3 or P3. I found it by trying the P3 utility and
had the same problem which pointed me to that cable.
Howard AE3T
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
