K4 Panadaptor Display

[Luis V Romero (mobile)]

Ray:

NiMMLogger Plus has that capability today.

Any radio that has I/Q out in a data stream can display a spectrum right in
the N1MMLogger Plus application.

Since I cant attach a photo here, I sent it to you direct.

It works well.  I have used it with my K3 IF out to a SDRPlay and direct
from a Flex 6000 series radio.

Im sure that K4 will have that capability and, if it doesn't, it should.

Lu Romero - W4LT
Tampa, FL


--------------=----------------=--------------------=----------------


Date: Tue, 26 Jan 2021 12:57:03 +0000
From: Ray Spreadbury <[hidden email]>
To: "[hidden email]" < [Elecraft] K4 Panadaptor Display >
Subject: [Elecraft] K4 Panadaptor Display

I wonder if it is possible to show the panadaptor(s) display as a separate
floating window on the external monitor?
So that for example you could have your logging program windows open as well
as a separately floating K4 panadaptor display showing on the same monitor.
73 Ray G3XLG

Sent from Mail for Windows 10

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Rick Tavan-2]

I've run AirSpy SDRs with K4 and N1MM Logger+ Spectrum Display Window. I
put the SDR in the RX antenna loop. It works great and I can set the
bandspread differently on the K4 itself vs. the SD Window. That lets me see
the whole band segment on the K4 and QSY long distances by touch while
viewing a much narrower segment on MM with spots, signal handles, and "CQ
hole finder."   The K4 pan is excellent but both it and MM SD together is
better!

/Rick N6XI

On Tue, Jan 26, 2021 at 11:03 AM <[hidden email]> wrote:

> Ray:
>
> NiMMLogger Plus has that capability today.
>
> Any radio that has I/Q out in a data stream can display a spectrum right in
> the N1MMLogger Plus application.
>
> Since I cant attach a photo here, I sent it to you direct.
>
> It works well.  I have used it with my K3 IF out to a SDRPlay and direct
> from a Flex 6000 series radio.
>
> Im sure that K4 will have that capability and, if it doesn't, it should.
>
> Lu Romero - W4LT
> Tampa, FL
>
>
> --------------=----------------=--------------------=----------------
>
>
> Date: Tue, 26 Jan 2021 12:57:03 +0000
> From: Ray Spreadbury <[hidden email]>
> To: "[hidden email]" < [Elecraft] K4 Panadaptor Display >
> Subject: [Elecraft] K4 Panadaptor Display
>
> I wonder if it is possible to show the panadaptor(s) display as a separate
> floating window on the external monitor?
> So that for example you could have your logging program windows open as
> well
> as a separately floating K4 panadaptor display showing on the same monitor.
> 73 Ray G3XLG
>
> Sent from Mail for Windows 10
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

--
--

Rick Tavan
Truckee and Saratoga, CA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]