[K4] Three RX antennas?

[Jim AB3CV]

I have an application where I would use 3 RX antennas. Two could use the
RX1 and RX2 ports but the third would use one of the ports provided by the
KAT4.

My concern is avoiding accidentally transmitting thru that third RX port.
Will the ANT CFG constraint of the TX antenna to ANT1 ensure that?

73

jim ab3cv
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[wayne burdick]

This can be easily set up. The K4 will protect the receivers, too.

Wayne



----
elecraft.com

> On Oct 11, 2020, at 12:10 PM, Jim Miller <[hidden email]> wrote:
>
> I have an application where I would use 3 RX antennas. Two could use the
> RX1 and RX2 ports but the third would use one of the ports provided by the
> KAT4.
>
> My concern is avoiding accidentally transmitting thru that third RX port.
> Will the ANT CFG constraint of the TX antenna to ANT1 ensure that?
>
> 73
>
> jim ab3cv
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim AB3CV]

Thanks!

jim ab3cv

On Sun, Oct 11, 2020 at 11:03 PM Wayne Burdick <[hidden email]> wrote:

> This can be easily set up. The K4 will protect the receivers, too.
>
> Wayne
>
>
>
> ----
> elecraft.com
>
> On Oct 11, 2020, at 12:10 PM, Jim Miller <[hidden email]> wrote:
>
> I have an application where I would use 3 RX antennas. Two could use the
> RX1 and RX2 ports but the third would use one of the ports provided by the
> KAT4.
>
> My concern is avoiding accidentally transmitting thru that third RX port.
> Will the ANT CFG constraint of the TX antenna to ANT1 ensure that?
>
> 73
>
> jim ab3cv
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]