Elecraft

K4

Classic

List

Threaded

5 messages Options

Terry Schieler-2

K4

Will I be able to initially load my K3S saved configurations into a new K4?
Will there be any disconnect there?

Terry, WØFM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Nr4c

Re: K4

Probably not. This won’t even work with K3 or K3S. And K4 is entirely new architecture.

Sent from my iPhone
...nr4c. bill

> On May 17, 2019, at 4:43 PM, Terry Schieler <[hidden email]> wrote:
>
> Will I be able to initially load my K3S saved configurations into a new K4?
> Will there be any disconnect there?
>
>
>
> Terry, WØFM
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Don Wilhelm

Re: K4

Terry,

I agree with Bill. I suggest you record your important menu preferences
with paper and pencil.

The K3 configuration file is for disaster recovery, and not intended to
transfer the configuration of one radio to another. In fact, it is
saved with a serial number identifier so it can only be used on that one
radio.

If you have a lot of stored memories, then it may be that the Frequency
Memory Editor can be helpful - but I don't know if it will be directly
reloadable into the K4.

73,
Don W3FPR

On 5/18/2019 9:39 AM, Nr4c wrote:

> Probably not. This won’t even work with K3 or K3S. And K4 is entirely new architecture.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On May 17, 2019, at 4:43 PM, Terry Schieler <[hidden email]> wrote:
>>
>> Will I be able to initially load my K3S saved configurations into a new K4?
>> Will there be any disconnect there?
>>

K9MA

Re: K4

I'm very satisfied with my K3, but one feature that might tempt me to
buy a K4 would be a really effective noise blanker. It seems to me that
a direct sampling receiver ought to be able to do this extremely well.
It wouldn't surprise me, though, if the software to do it isn't
initially available.

73,

Scott K9MA

--
Scott K9MA

[hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

stengrevics

Re: K4

One of my two questions. The other is regarding relative sensitivity/noise floor compared to the K3S.

73,

John
WA1EAZ

> On May 18, 2019, at 10:13 AM, K9MA <[hidden email]> wrote:
>
> I'm very satisfied with my K3, but one feature that might tempt me to buy a K4 would be a really effective noise blanker. It seems to me that a direct sampling receiver ought to be able to do this extremely well. It wouldn't surprise me, though, if the software to do it isn't initially available.
>
> 73,
>
> Scott K9MA
>
> --
> Scott K9MA
>
> [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html