KAT 100 Resistance Checks

[Chuck Gehring]

I am building the KAT 100, the Resistance checks look fine except for U2 Pin
12 shows some resistance and then a short to ground.  I have gone back and
checked for solder bridges.  I have checked the reflector for previous
posts.   I don't have U1 installed and the schematic shows pin 12 connecting
to Pin 12 of U3, U4 and RYLoad.

Any recommendations

Chuck Gehring

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Chuck Gehring]

Please accept my apologies for wasting the bandwidth.  I was suffering from
a case of "Cranial Rectal Inversion" I was not counting the pins on U2
correctly.  Resistance checks okay.  KAT 100 passed initial tests.

Chuck Gehring

"I am building the KAT 100, the Resistance checks look fine except for U2
Pin
12 shows some resistance and then a short to ground. "

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com