I have read the KAT100/KPA100 description by KK7P, as well as various
reflector postings. However, the KK7P description covered several configurations,
including operating a K2 with only the KPA100 in an EC-2, as well as with a
KAT100 & KPA100 integrated in the EC-2. Thus, I'm still not clear on a couple
things.
I want to remove the KPA100 from my K2 and install it in the KAT100-2
enclosure. Since I will NOT be using any type of computer control, is it still
necessary to install a KIO2 in the K2 and beef up the handling capacity of the RF
choke?
Or,
Is it sufficient to merely make the internal EC-2 interconnections as
described in the KK7P description, and use the same control cable (which does not
include the branch cable for connection to a PC) between the barefoot K2 and the
EC-2 combo that I formerly used when operating the KAT100 (in the EC-2) and
the KPA100 (in the K2).
Am I correct that I can connect the control cable to EITHER the KPA100 DB-9
or the KAT100 DB-9, in the EC-2? Thanks.
Bob, WO3E
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
