I have a built K2 with the KPA100 installed in it, I now want to remove it and place it into the EC enclosure along with my un-built KAT-100. My questions are.... 1. What do I need to purchase to do this from Elecraft? 2. At a later date can I install the KAT2 tuner or does it have to be done now. I want to use the K2 for portable op's but that won't be until a later date. Thanks all for your time VE3WDM http://ve3wdm.blogspot.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1 Mike, You need an EC2 enclosure and the KAT100PNL front and back panel kit which converts the KAT100-1 to a -2. Since you have the KPA100 you have the KIO2 built in. On 8/6/2011 11:05 AM, Mike Weir wrote: > > I have a built K2 with the KPA100 installed in it, I now want to remove it and place it into the EC enclosure along with my un-built KAT-100. > My questions are.... > 1. What do I need to purchase to do this from Elecraft? > 2. At a later date can I install the KAT2 tuner or does it have to be done now. I want to use the K2 for portable op's but that won't be until a later date. > Thanks all for your time > VE3WDM > http://ve3wdm.blogspot.com > - -- R. Kevin Stover ACØH -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJOPWzoAAoJEAu8BkU0m9MngTEH/jw3G3o3z4rWmXZckNQ6Zf62 Z+eYEl0l3E6wPMMzHlOLqeJaTSb9UxaJ6M91b4In4qv6ICNG6uSWEG1gfZ/7NW+I 7FNUV7158VOKoW5Mrn24ia3Eki95GhiT/mmODPVDvdXltzhWIRTDm/O/ORKmNP6+ Dnoif+EQCLKRs9iatOXpyUjEfJju8FKDa8FU1tGJAWwBMtEbMqTLUzOQKYQfQoAR 1woMkeFgFu3u7LOYP9msiagjXwMhZet+5jUEKtYfaRPjK/H7Sp+mgCtdyRCJHcd1 LBqOaf+5S/h6AhbA/3iUwRj882Xd4P7vT/hOxaXizQhVYQLljz6gIavUDA4Fxek= =2SrV -----END PGP SIGNATURE----- ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Mike, the comment about already having the KIO2 below is not correct.
You currently have the KIO2 functionality in the KPA100, but you will lose that function from the KPA100 when it is mounted remotely. You will need the KIO2 or a suitable substitute in the base K2 top cover - the substitute will not give you computer connectivity, but will allow you to connect to the KPA100/KAT100. I strongly recommend you order the KAT100-1 to KAT100-2 conversion kit. It has the headers for the KPA100 connections as well as the full height front and rear panels for the KAT100. You will also need to order the EC2 enclosure. You already have the parts to assemble the connecting cable - build it just like the cable shown in the KAT100 manual. On 8/6/2011 12:33 PM, R. Kevin Stover wrote: > Mike, > > You need an EC2 enclosure and the KAT100PNL front and back panel kit > which converts the KAT100-1 to a -2. > > Since you have the KPA100 you have the KIO2 built in. > > On 8/6/2011 11:05 AM, Mike Weir wrote: >> I have a built K2 with the KPA100 installed in it, I now want to remove it and place it into the EC enclosure along with my un-built KAT-100. >> My questions are.... >> 1. What do I need to purchase to do this from Elecraft? >> 2. At a later date can I install the KAT2 tuner or does it have to be done now. I want to use the K2 for portable op's but that won't be until a later date. >> Thanks all for your time >> VE3WDM >> http://ve3wdm.blogspot.com > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Free forum by Nabble | Edit this page |