KAT100

[Eddy]

Can the KAT100 be adapted for use with other rigs as well as the K2?

Thanks........../ed

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

The KPA100 needs access to internal K2 signal lines for bandswitching,
T/R states, and other functions, so it is not usable with other rigs.

73,
Don W3FPR

On 4/23/2013 1:29 AM, Eddy wrote:
> Can the KAT100 be adapted for use with other rigs as well as the K2?
>
> Thanks........../ed
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Johnny Siu]

If one don't need the amp to be integrated with the K2, then the later KXPA100 could be a good choice.  It can be used with other rigs as well.


TNX & 73,


Johnny VR2XMC


________________________________
 寄件人︰ Don Wilhelm <[hidden email]>
收件人︰ Eddy <[hidden email]>
副本(CC)︰ [hidden email]
傳送日期︰ 2013年04月23日 (週二) 8:02 PM
主題︰ Re: [Elecraft] KAT100
 

The KPA100 needs access to internal K2 signal lines for bandswitching,
T/R states, and other functions, so it is not usable with other rigs.

73,
Don W3FPR

On 4/23/2013 1:29 AM, Eddy wrote:
> Can the KAT100 be adapted for use with other rigs as well as the K2?
>
> Thanks........../ed
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bruce Beford-2]

The question was about the KAT100 tuner, not the KPA100 amp.
Bruce, N1RX
 
> The KPA100 needs access to internal K2 signal lines for bandswitching,
> T/R states, and other functions, so it is not usable with other rigs.
 
> 73,
> Don W3FPR
 
On 4/23/2013 1:29 AM, Eddy wrote:
> Can the KAT100 be adapted for use with other rigs as well as the K2?
>
> Thanks........../ed
>
 

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Sorry about mis-reading.
The same answer applies to the KAT100 too - it must also have the
various K2 internal signals to function properly.

73,
Don W3FPR

On 4/23/2013 11:01 AM, Bruce Beford wrote:

> The question was about the KAT100 tuner, not the KPA100 amp.
> Bruce, N1RX
>  
>> The KPA100 needs access to internal K2 signal lines for bandswitching,
>> T/R states, and other functions, so it is not usable with other rigs.
>  
>> 73,
>> Don W3FPR
>  
> On 4/23/2013 1:29 AM, Eddy wrote:
>> Can the KAT100 be adapted for use with other rigs as well as the K2?
>>
>> Thanks........../ed
>>
>  
>
>  
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html