This one is very easy to accomplish. You just open the case to the
Icom, remove everything inside, then install a K2 in the now empty case.
Seriously, the KAT100 uses information provided directly by the K2 as
communicated through the Elecraft K2 Auxbus. Thus the KAT100 will
only work with the K2.
But, The Elecraft T1 tuner should do the trick for you. Check it out
at www.elecraft.com.
On Jul 26, 2005, at 7:50 PM, Doug Shields wrote:
> Hello all,
> I know I have seen this information before but I can't find
> where it is
> located. I would like to use a KAT100 tuner with an Icom IC-735
> transceiver. What do I have to do to accomplish this? Any help
> would be
> greatly appreciated.
- Jack Brindle, W6FB
------------------------------------------------------------------------
---------------------
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com