KAT2 Manual Issue - Page 10

[joey mcg]

Is the green wire supposed to go to J8 pin 1 (next to arrow) as show on page 10 diagram, or is it to go to pin 2 as described in the manual text?
   
  How about the rest of the wires, do they go as the diagram indicates?
   
  Thanks
   
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Joey (I assume - you did not sign your name or call),

The green wire connects with Control Board P4 pin 2.  And YES, it will
look like the manual diagram when correctly completed.  The green wire
goes toward the top of P4.

Yes, in this case, the arrow is closest to J8 pin 2.  The rest of the
wires do connect as indicated in the diagram.

73,
Don W3FPR

joey mcg wrote:
> Is the green wire supposed to go to J8 pin 1 (next to arrow) as show on page 10 diagram, or is it to go to pin 2 as described in the manual text?
>    
>   How about the rest of the wires, do they go as the diagram indicates?
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com