KAT2 upgrades

[Craig Rairdin]

I just picked up an assembled KAT2 from a fellow Elecrafter and note that
it's a couple revs behind the current version. I browsed around the Elecraft
site but couldn't find anything that would succinctly tell me what, if
anything, I would need to do to bring this unit up to the current version.
Is there such information somewhere?
 
Craig
NZ0R
K1 #1966
K2 #4941
KPA100 status - winding torroids
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Craig,

The KAT2 has changed little.  To bring it up to date, change R6 to 470 ohms
and upgrade the firmware.  That is all that I am aware of - if someone has
better info, please correct me.  Mine works fine with those 2 changes, and
my unit was one of the initial Field Test models.

73,
Don W3FPR

> -----Original Message-----
>
> I just picked up an assembled KAT2 from a fellow Elecrafter and note that
> it's a couple revs behind the current version. I browsed around
> the Elecraft
> site but couldn't find anything that would succinctly tell me what, if
> anything, I would need to do to bring this unit up to the current version.
> Is there such information somewhere?
>
> Craig
> NZ0R
> K1 #1966
> K2 #4941
> KPA100 status - winding torroids
>

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.9.0/50 - Release Date: 7/16/2005

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com