KAT3 settings storage

[Paul Kirley]

Firmware beta 3.03 significantly increases the number of settings automatically stored for the KAT3.

Are the settings stored on the KAT3 board, or is general storage used?

The KAT3 schematic shows three critters, but it's not clear to me if they are capable of both storage and relay control, or only the latter.

73, Paul W8TM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[wayne burdick]

On Mar 19, 2009, at 8:36 AM, Paul Kirley wrote:

> Firmware beta 3.03 significantly increases the number of settings
> automatically stored for the KAT3.
>
> Are the settings stored on the KAT3 board, or is general storage used?

Hi Paul,

The ATU settings are stored in the K3's front panel EEPROM. The KAT3
itself has only relay drivers.

73,
Wayne
N6KR

---

http://www.elecraft.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html