The Edit box is blank when any band differs from another. If you select
each band individually, you should see their individual values, and some
should be different from one another.
If you want to set all bands to the same value, type that value into the
empty box and click "apply". If you want to set one band different from the
rest, choose that band and the value you want for that band.
I'll work on the help text a bit to make this clear.
73 de Dick, K6KR
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Arie Kleingeld PA3A
Sent: Thursday, February 06, 2014 8:37 AM
To:
[hidden email]
Subject: [Elecraft] KAT500 FW01.54 beta Configuration VSWR Thresholds
KAT500 FW 01.54 beta
KAT500 Utility 1.13.5.12 for Win.
As far as I know I could set the VSWR thresholds for Autotune and Bypass.
These show up empty when I connect the KAT500 Utily to the KAT500 and tried
to change the settings.
73
Arie PA3A
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
