Use two of the shorter 4" ties in series !
Pete, W4WWQ
----- Original Message -----
From: "Roy Morris" <
[hidden email]>
To: <
[hidden email]>
Sent: Tuesday, May 21, 2013 9:40 PM
Subject: [Elecraft] KAT500 Owner's Manual Errata
>I have one of the earlier KAT500 kits that did not mention installing the
>cable ties to secure the four large toroidal inductors, so I decided I
>would bring my tuner up to date using the 4" plastic cable ties. The cable
>tie holes exist on the PC board. The largest toroid could not be secured
>with a 4" cable tie. It is not long enough, so I will see if I can find a
>longer tie at Home Depot or Lowes. Roy Morris W4WFB
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html