KAT500 help

[Bob KD7YZ]

I have a K3 and the KAT500.

Today I realized that when I switched from, say, 10m to 6m that the ANT
stayed with ANT-1. In fact, it stays on whatever I manually move it to.

I also have ANT3 which is a cantenna dummy load kludge, fwiw.

Using the KAT500 Utility I verified that 6m has "Enabled" both #2 and
#3. 6 has #2 "Preferred" .

10m, and all HF, has #1 and #3 "Enabled" and #1 Preferred.

Inside the KAT500 utility I can switch Auto, manual and bypass.It seems
I have full control of the KAT500 with the utility.

I removed DC power from both K3 as well as KAT500 after checking.

Summary is no matter what band I select on the K3, the KAT500 doe not
follow.

What can I check, here, to see why the antenna tuner no longer
automatically switches when I change bands?

--
73,
Bob KD7YZ
www.qrz.com/db/kd7yz
AmSat LM#901
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bob KD7YZ]

On 04-Oct-15 1611, Bob KD7YZ wrote:

> What can I check, here, to see why the antenna tuner no longer
> automatically switches when I change bands?
>

got the answer direct email ... seems due to the extreme rats-nest of
cable(s) to 3 XVxx transverters; EME sequencers, KAT500, PC cables and
stuff passing back and forth, that I overlooked a slightly removed cable.

--
73,
Bob KD7YZ
www.qrz.com/db/kd7yz
AmSat LM#901
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]