KAT500 question

[Elecraft mailing list]

My KAT500 turns on by itself after a power outage.  I can then turn it off and it stays off until another power outage.  I am using a regulated wall wart to power it.  Is this normal behavior? I keep it powered continuously but normally turned off.   Allen, W0OUU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[k6mrmagnet]

Configuration page of the utility, “Initial Power” tab.  Uncheck “Power On when DC power applied”.



Ken K6MR



________________________________
From: [hidden email] <[hidden email]> on behalf of Allen Bush via Elecraft <[hidden email]>
Sent: Wednesday, September 19, 2018 4:46:25 PM
To: [hidden email]
Subject: [Elecraft] KAT500 question

My KAT500 turns on by itself after a power outage.  I can then turn it off and it stays off until another power outage.  I am using a regulated wall wart to power it.  Is this normal behavior? I keep it powered continuously but normally turned off.   Allen, W0OUU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]