KDSP2's Primary Menu - K2 s/n 549

[Bill Scurlock]

When I tap the DISPLAY button on my K2 to access the KDSP2's primary menu I
get an error message:  E13.1 0.40.  The last time I used the KDSP2, about a
month ago, this menu access worked correctly.  The only thing different
since then is that I removed the K2/100 top unit, and reinstalled the
original top unit with the antenna tuner.  Also, I installed the new 2.04 K2
firmware and the 1.09 I/O controller firmware.

What does E13.1 mean?  Where can I get a listing of the error codes?

The AFIL seems to work fine.  Help.

Bill, K5GCW


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bob Nielsen]

On Wed, Nov 17, 2004 at 09:47:01PM -0600, Bill Scurlock wrote:

> When I tap the DISPLAY button on my K2 to access the KDSP2's primary menu I
> get an error message:  E13.1 0.40.  The last time I used the KDSP2, about a
> month ago, this menu access worked correctly.  The only thing different
> since then is that I removed the K2/100 top unit, and reinstalled the
> original top unit with the antenna tuner.  Also, I installed the new 2.04 K2
> firmware and the 1.09 I/O controller firmware.
>
> What does E13.1 mean?  Where can I get a listing of the error codes?
>
> The AFIL seems to work fine.  Help.
>

Not an error code.  13.1 is the supply voltage and 0.40 is the current.

However, you should get that on the second tap and the DSP information
on the first tap.  A third tap should return you to the frequency
display.

Bob, N7XY
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[KK7P]

>>What does E13.1 mean?  Where can I get a listing of the error codes?
>>
>>The AFIL seems to work fine.  Help.
>>
> Not an error code.  13.1 is the supply voltage and 0.40 is the current.
>
> However, you should get that on the second tap and the DSP information
> on the first tap.  A third tap should return you to the frequency
> display.

This tends to indicate that the K2 doesn't think the KDSP2 is installed.
  Since you did a complete firmware update, be sure you drill down to
the K2's real time clock menu item and turn it on.


73,

Lyle KK7P



_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com