KDSP2

[wb2srf]

I just built the KDSP2 and found that the SSB Low Pass filter setting on
filter 1 does not work as expected.
 
The noise bandwidth is reduced instead of being wide. I have set the high
frequency cutoff to 2.5 KHz for now. Any settings above 2.5 KHz also do
not appear to function properly. Is there a known solution to this
problem ?
 
73,
 
Bob Johansen WB2SRF
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Bob,

I am not certain I understand the description of the problem.  You say it
does not 'function properly', but if you can explain what it IS doing that
you believe to be improper, we may be able to provide an answer for you.

73,
Don W3FPR

> -----Original Message-----
>
> I just built the KDSP2 and found that the SSB Low Pass filter setting on
> filter 1 does not work as expected.
>
> The noise bandwidth is reduced instead of being wide. I have set the high
> frequency cutoff to 2.5 KHz for now. Any settings above 2.5 KHz also do
> not appear to function properly. Is there a known solution to this
> problem ?
>
> 73,
>
> Bob Johansen WB2SRF
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com