KI 4 Band Board

[Glenn Haffly-2]

I have not looked at the K1 order page in a while , Is the 4 band board no
longer available or did I overlook it?

Thanks Glenn
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Glenn,

You are correct, it is not currently listed.  I have a suspicion it is
because the blue trimmer capacitors used on the 4 band board are no
longer available.
I recently assembled a KXB3080 option for a KX1 which used to use the
same capacitors and noticed that the trimmers had been changed to a new
type, so I suspect the old ones are "unobtainium".
This may be a temporary removal until all the manufacturing paperwork
has been updated.  Perhaps someone closer to the supply situation at
Elecraft than I will respond with a positive answer.

73,
Don W3FPR

On 7/3/2014 1:40 PM, Glenn Haffly wrote:
> I have not looked at the K1 order page in a while , Is the 4 band board no
> longer available or did I overlook it?
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]