Dana,
I do have a perfectly working spare...let me take a look today as I have a bunch of spares for the Elecraft lines that I need to quantify...let me know if you are interested.
Mike
K7PI
-----Original Message-----
From:
[hidden email] <
[hidden email]> On Behalf Of Dana
Sent: Wednesday, July 29, 2020 07:41
To:
[hidden email]
Subject: [Elecraft] KI03 Damaged
HI all…
My K3 suffered some EMP damage from a recent T storm… I’ve found L4 on the KIO3 remote IO board open with evidence of heating on it….not sure what else may have been nuked.
If I turn on the radio with the KIO3 in the radio boots up but then switches between TX and RX about 1/ sec … everything else seems normal.
If I try to connect via RS232 it just goes into TX …
If I pull the board all appears functionally normal.
Has anyone experienced this similar issue when the IO gets damaged?
Does anyone have a spare KIO3 board that they may have pulled and saved when upgrading to the USB IO set up, or any suggestions as to what else may be damaged , like U1 ?
Thanks in advance
73 Dana VE3DS
Toronto
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html Message delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
