KIO2 and K60XV pecking order.

[Ivan Davies]

By Ivan G3IZD.
            I am awaiting delivery of the above in preparation for building the 2m transverter. Is there a logical order in which to install and test these when construction is complete.
            Incidentally, filter alignment using Spectrograph was most rewarding, especially on the narrower CW settings and CW rev.
            Ivan G3IZD K2 S/N 4555
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Jack Brindle]

KIO2. The K60XV is not needed for the Elecraft transverters. Take a  
look at one of the transverter manuals for more information on  
connecting things.


On Apr 27, 2005, at 6:00 AM, Ivan Davies wrote:

> By Ivan G3IZD.
>             I am awaiting delivery of the above in preparation for  
> building the 2m transverter. Is there a logical order in which to  
> install and test these when construction is complete.
>             Incidentally, filter alignment using Spectrograph was most  
> rewarding, especially on the narrower CW settings and CW rev.
>             Ivan G3IZD K2 S/N 4555
>

- Jack Brindle, W6FB
------------------------------------------------------------------------
---------------------

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Ron D'Eau Claire-2]

Jack, W6FB wrote:
KIO2. The K60XV is not needed for the Elecraft transverters. Take a  
look at one of the transverter manuals for more information on  
connecting things.

-------------------

True, but the K60XV is a *very* nice interface that makes using the K2 with
the transverters much easier and more straightforward, especially if you
want to use the K2 on HF as well.

I don't think it makes any difference in the order of adding them, but I
have a K2/100 equipped with the K60XV, so I can't speak from personal
experience.

Ron AC7AC



_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com