Hi folks,
Last night I performed the KIO3B upgrade on my new (old) K3. As with all
Elecraft projects I've done, documentation was great, and things work as
expected. A few minor things needed some thinking:
* I forgot to upgrade the firmware before installing it, but I was able to
get the right firmware version loaded over USB by toggling the KIO3B into
RS232/legacy mode.
* A hidden end of one of the TMP cables got loose while I was putting
everything back together, which caused an easily-fixed ERR PL1.
* The lack of sound scared me for a minute, but then I found the very last
instruction, to toggle the KIO3B speaker -/+ setting, and that fixed the
sound.
This is the neatest digital-capable ham shack I've ever had, and I'm
already happy I installed it. Thanks, Elecraft folks.
Bruce
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
